ITI Engineering Drawing MCQ PDF 2023 [240 MCQs]

ITI Engineering drawing MCQ PDF. Top most important 240 MCQs set for 2023 Exams preparation. These questions collect from previous year ITI ED Question papers, NIMI Mock test app, and Bharat skills Question Bank. Helpful for Online CBT Exam.

ITI Engineering Drawing MCQ

1. A French curve is used to draw   

A. Circles                    

B. Smooth freeform curve

C. Right circular cone            

D. Orthographic projection

Ans. B

2. Name the curve which has Zero eccentricity

A. Circle         

B. Parabola

C. Hyperbola  

D. Ellipse

Ans. A

3. Lettering of drawing sheet should have – [ITI Jan 2018]

a) In a sentence only first alphabet in capital letters

b) All alphabets in small letters

c) In a sentence only abbreviations in capital letters

d) All alphabets in capital letters

Ans. D

4. To lay off an angle from a given line, what marks on the protector should your align for higher accuracy- [ITI Jan 2018]

a) Centre mark and 0 marks only      

b) 00 and 1800 marks only

c) 00, 1800 and centre marks             

d) 00, 900 and 1800 marks

Ans. C

5. Which of the following pairs of orthographic views both show the height dimension? [Jan 2018]

a) Left side and front             

b) Top and Front

c) Top and Rear                     

d) Bottom and Right side

Ans. B

6. The recommended symbol for indicating the angle of projection shows two views of the frustum of a – [Jan 2018]

a) Square Pyramid

b) Triangle Pyramid

c) Cone

d) Any of these

Ans. C

7. The projection in isometric view are – [Jan 2018]

a) Converging

b) Parallel to the plane of projection

c) Diverging

d) Perpendicular to the plane of projection

Ans. B

8. “Principles of folding of drawing prints” are laid down in IS: _______ in India. [July 2018]

a) 11665-1985

b) 11664-1984

c) 11669-1986

d) None of these

Ans. D (11664-1986)

9. Sectional area is shown by hatching lines which are generally inclined at – [July 2018]

a) 450

b) 300

c) 600

d) 750

Ans. A

10. Size ‘D1’ of the drawing board refers to _______ (l x w x t) mm. [July 2018]

a) 1500 x 1000 x 25

b) 1000 x 700 x 25

c) 700 x 500 x 15

d) 500 x 350 x 15

Ans. B

11. In inclined lettering, the stem is inclined _____ to the left. [NCVT July 2018]

a) 150

b) 350

c) 450

d) 750

Ans. D

12. As per recommendations of IS: 11665-1985, the LHS side margin line of a drawing sheet for class work should be kept as _____ mm [July 2018]

a) 5 mm

b) 10 mm

c) 15 mm

d) 20 mm

Ans. d

13. ______ is generally used to show areas of sections. [July 2018]

a) Hatching

b) Shading

c) Dimensioning

d) None of these

Ans. A

14. The section lines are equally spaced ________ lines. [ITI ED July 2018]

a) Thick

b) Thin

c) Medium

d) Dotted

Ans. B

15. The Top, Front and Bottom views align in this manner ______. [July 2017]

a) Horizontally

b) Vertically

c) According to the planed views

d) Parallel to the frontal planes

Ans. B

16. For orthographic projection, the engineering custom bureau of Indian Standards dictates the use of: [July 2017]

a) First-angle projection

b) Second-angle projection

c) Third-angle projection

d) Fourth-angle projection

Ans. A

17. Hatching lines are drawn at an angle of ______. [July 2017]

a) 150

b) 300

c) 450

d) 600

Ans. C

18. In an isometric sketch of a cube [July 2017]

a) The receding axes are at 45 degree to the horizontal

b) the frontal face appears in its true shape

c) only the depth distances must be reduced

d) all faces are equally distorted

Ans. D

19. Super imposed dimensioning is the simplest method of _______. [July 2017]

a) Chain dimensioning                       

b) Parallel dimensioning

c) Combined dimensioning                

d) Tabular dimensioning

Ans. B

20. When (1) visible outlines (2) hidden outlines (3) projection lines and (4) centre lines overlap, the recommended sequence of priority is [July 2017]

a) 1-2-3-4

b) 1-2-4-3

c) 2-1-3-4

d) 2-1-4-3

Ans. B

21. Which of the following publications made by Bureau of Indian Standards includes standard techniques for line conventions and lettering in detail? [July 2017]

a) SP 46

b) BIS 9609

c) ASME Y 14.2M

d) ISO 2009

Ans. A

22. The projection showing the front in the true shape and size is

(a) isometric

(b) perspective

(c) oblique

(d) axonometric

Ans: c

23. Which is not a principal view?

(a) front                      

(b) bottom                  

(c) auxiliary                

(d) left side

Ans: (c)

24. This type of projection is when projectors are parallel to each other, but are at an angle other than 90 degrees to the plane of projection:

(a) perspective           

(b) oblique      

(c) aesthetic               

(d) angular
Ans: (b)

25. This is how axonometric, oblique, and perspective sketches show objects

(a) Orthographically

(b) Pictorially

(c) Obliquely

(d) Parallel

Ans: (b)

26. The solid having a polygon for a base and triangular lateral faces intersecting at a vertex is

(a) pyramid

(b) prism

(c) cone

(d) torus

Ans: (a)

27. This type of section is limited by a break line

(a) removed section

(b) revolved section

(c) broken-out section

(d) half section

Ans: (c)

28. This type of section is not in direct projection from the view containing the cutting plane

(a) revolved section

(b) removed section

(c) broken-out section

(d) full section

Ans: (a)

29. The curve generated by a point on the circumference of a circle, which rolls without slipping along outside of another circle is known as

(a) Hypocycloid

(b) Epicycloid

(c) Cycloid

(d) Trochoid

Ans: (b)

30. In orthographic projections, the rays are assumed to

(a) diverge from station point

(b) converge from station point

(c) be parallel

(d) None of these

Ans: (c)

31. Which of the following object gives a circular section, when it is cut completely by a section plane (irrespective of the angle of the section plane)

(a) Cylinder                

(b) Sphere

(c) Cone                      

(d) Circular lamina

Ans: (b)

32. Comparative scale is a pair of scale having a common

(a) units                                  

(b) representative fraction

(c) length of scale                  

(d) least count

Ans: (b)

33. An angle can be set off and measured with the help of

(a) plane scale                                   

(b) diagonal scale

(c) comparative scale            

(d) Scale of chords

Ans: (d)

34. Which types of line is used to draw dimension lines?

a) Long chain thin

b) Long chain thick

c) Continuous thin

d) Continuous thick

Ans. C

35. Dimensions giving close to each other and in a straight is called

A. Chain dimensioning

B. Parallel dimensioning

C. Combine dimensioning

D. None of the above

Ans. A

36. Two recommended systems of placing the dimensions are

A. Unidirectional and aligned

B. Upright and inclined systems

C. Linear and oblique systems           

D. Linear and inclined systems

Ans. A

37. Grid References on a drawing sheet provide the following information

A. Location of details, additions, modifications, revisions, etc. of drawing  

B. To facilitate the positioning of the drawing when reproduced

C. To facilitate trimming       

D. To facilitate brief record and initials of the person responsible

Ans. A

38. Revision tables on a drawing sheet provide the following information

A. Designation of revision      

B. Date of revision

C. Initials of the person responsible  

D. All the above

Ans. D

39. Center lines are used to locate or represent the centers of        .

A. Arcs                                    

B. Circles

C. Hidden round features      

D. All of the above

Ans. D

40. Dimension line should not _____to each other

A. Parallel                  

B. Cross

C. Perpendicular                    

D. Inclined

Ans. B

ITI Engineering Drawing MCQ PDF (240 MCQs Set)
ITI Engineering Drawing MCQ [PDF] Questions in Hindi
ITI Engineering Drawing tools in Hindi [PDF]
ITI Engineering Drawing 500 MCQ E-Book in Just Rs.12/-